YAVAPAI COUNTY PLANNING AND ZONING ORDINANCE Page 129 c. Subdivision Signs: Permanent subdivision entrance signs are permitted. At the major street entrance to a subdivision or development, not more than two (2) signs are permitted, indicating only the name, symbol, logo, or other graphic identification of the subdivision or development each sign not exceeding twenty (20) square feet in area, not exceeding six feet (6’) in height, attached to and not extending above a wall or fence. 2. Temporary Signs: Temporary signs as provided in Subsection C.2. (Special Purpose Signs) of this Section are permitted, subject to all regulations contained therein. F. SIGN REGULATIONS Specific to Light Commercial Districts: RS (Residential Services), C1 (Light Commercial), and PM (Performance Industrial). No sign shall be placed or maintained in any RS, C1 or PM Zoning District, except as follows: 1. Identification or Advertising: Signs identifying uses permitted in any RS, C1, or PM District and not located in a commercial or industrial center, are permitted subject to the following: a. Signs may be wall-mounted, free standing or portable. b. The aggregate sign area on any one (1) property shall not exceed an area of one (1) square foot for each linear foot of street frontage adjoining the property to which it pertains, except that the total area need not be less than twenty-four (24) square feet, and in no case shall the area exceed ninety-six (96) square feet. c. One (1) free-standing sign is permitted, the area of which may not exceed one- third (1/3) of the allowable total aggregate area for the property, except that the area of the sign need not be less than sixteen (16) square feet. This sign may be double-faced. d. Free-standing signs shall not exceed a height of twelve feet (12’), except that free- standing signs at Interstate Freeway Interchanges (see Definitions) in the C1 Zoning District shall not exceed a height of thirty feet (30’). e. Signs shall be located on the property to which they pertain. f. In addition to the signs described above, each separately housed business may have one (1) portable on-premise identification or advertising sign, not to exceed six (6) square feet in area, nor four feet (4’) in height, which may be double-faced. Such portable sign shall be included in the aggregate sign area allowances. See Subsection A.19. (General Provisions) of this Section. 2. Temporary Signs: Temporary signs as provided in Subsections A.2. (General Provisions) and C.2. (Special Purpose Signs) of this Section are permitted, subject to all regulations contained therein. G. SIGN REGULATIONS Specific to the Medium Commercial C2 Zoning District. No sign shall be placed or maintained in any C2 Zoning District, except as follows: 1. Identification or Advertising: Signs identifying uses permitted in any C2 District and not located in a commercial or industrial center are permitted subject to the following: a. Signs may be wall-mounted, free standing, or portable. b. The aggregate sign area on any one (1) property shall not exceed an area of one (1) square foot for each linear foot of street frontage adjoining the property to which it pertains, except that the total area need not be less than twenty-four (24)